this drawing is the property of raf. it contains confidential, proprietary information that is raf property. do not disclose to or duplicate for others except as authorized by raf. tolerances all dimensions are inches (unless otherwise specified) metallic lengths : 6 inches 0.010 diameters: 0.005 non-metallic length: 0.010 diameters: 0.010 internal threads: minimum thread depth scale sheet 1 of 1 rev date drn chk change sj t drawn 0.079 [2.00] 0.106 +0.011 -0.000 2.70 +0.30 -0.00 [ ] 0.177 [4.50] 4.5mm round spacers M0501-25-AL 12.65 95 silvermine rd.,seymour ct 06483 tel: 203-888-2133, fax: 203-888-9860 02/06/17 component spacers notes: 1. material : aluminum 2. finish : no plate 3. asme y14.5m - 2009 4. all drawing dimensions are in inches [mm] 5. unless otherwise specified; edge breaks, radii or countersinks 0.005-0.015
|
